Why Silicone-Elastomer Coating

The silicone-elastomer coating creates a smooth, low-friction surface that facilitates gentler insertion and removal compared to uncoated catheters, helping reduce patient discomfort and potential urethral trauma during standard catheterization procedures.

Key Features & Benefits

• Silicone-elastomer coating reduces surface friction for smoother insertion and removal
• 2-way design with drainage lumen and balloon inflation port for standard indwelling use
• 5 mL retention balloon ensures secure positioning in the bladder
• Two polished drainage eyes promote consistent urine flow and help minimize urethral irritation
• 16 French (16 Fr) size provides larger drainage capacity while maintaining patient comfort
• Color-coded funnel enables quick size identification in busy clinical settings
• Radiopaque stripe/markers allow X-ray visualization for placement confirmation (varies by lot)
• Sterile, single-use design prevents cross-contamination
• Individually packaged for convenient single-catheter dispensing
• Enhanced patient comfort during insertion and removal procedures
• Reliable drainage performance reduces need for early catheter changes
• Clear size markings streamline clinical workflows
• Cost-effective option combining coating benefits with dependable performance

Clinical Applications

Ideal for patients requiring: ✓ Short- to intermediate-term bladder drainage (typically up to 30 days) ✓ Post-operative urinary management following abdominal, pelvic, or urological surgery ✓ Accurate urine output monitoring in critical care or perioperative settings ✓ Bladder decompression due to urinary retention or obstruction ✓ Immobilized patients unable to void independently ✓ Standard catheterization where latex allergies are not a concern ✓ Larger drainage capacity for higher urine output needs (16 Fr vs smaller sizes) ✓ Medication instillation or bladder irrigation procedures

Usage & Application

Sizing & Preparation:

• Verify 16 Fr size matches physician order and patient needs
• Confirm patient has no latex allergy—this catheter contains natural rubber latex
• Inspect sterile packaging for integrity—discard if compromised
• Gather all supplies: catheter, sterile gloves, drapes, antiseptic solution, lubricant, prefilled 5 mL sterile water syringe, drainage bag with tubing
• Note smaller balloon: This catheter uses 5 mL balloon (not standard 10 mL)
• Test balloon BEFORE insertion: inflate with 5 mL sterile water, inspect for leaks or irregularities, then deflate completely
• Ensure adequate lighting and patient privacy

Application:

1. Perform hand hygiene and explain procedure to patient
2. Verify patient identity and confirm catheterization order
3. Confirm no latex allergy documented in patient record
4. Position patient appropriately (supine for females, supine or semi-recumbent for males)
5. Open sterile catheter tray and establish sterile field
6. Don sterile gloves using aseptic technique
7. Clean urethral meatus with antiseptic solution per protocol (typically three swipes)
8. Apply generous amount of sterile water-based lubricant to catheter tip (5-7 inches for males, 2-3 inches for females)
9. Insert catheter gently using appropriate technique until urine flows
10. Advance catheter an additional 1-2 inches (to hub) to ensure balloon is fully in bladder
11. Inflate retention balloon with exactly 5 mL sterile water (never use saline)
12. Gently pull back on catheter until resistance is felt, confirming balloon engagement at bladder neck
13. Secure catheter to patient's inner thigh using appropriate securement device to prevent urethral traction
14. Connect to sterile closed drainage system positioned below bladder level
15. Document procedure, balloon volume (5 mL), catheter size (16 Fr), and initial urine characteristics

Monitoring the Catheter:

• Check urine color, clarity, and volume regularly
• Ensure tubing remains kink-free and drainage bag below bladder level
• Monitor insertion site for signs of irritation, bleeding, or infection
• Verify balloon remains inflated and catheter secure
• Assess patient comfort and check for bladder distension
• Watch for any signs of latex reaction (redness, swelling, itching)
• Maintain closed drainage system to reduce catheter-associated urinary tract infection (CAUTI) risk
• Perform catheter care per facility protocol (typically twice daily)

Drainage Management:

• Empty drainage bag when 2/3 full or per facility protocol
• Use separate, clean collection container for each patient
• Avoid touching drainage spout to collection container
• Wipe spout with alcohol swab after emptying
• Document output volume, color, and characteristics
• Report abnormal findings (hematuria, cloudiness, sediment, foul odor)
• Maintain dependent drainage at all times
• 16 Fr size provides larger capacity flow for higher output patients

Catheter Removal:

1. Verify removal order from physician
2. Perform hand hygiene and don clean gloves
3. Disconnect from drainage system
4. Use syringe to completely deflate balloon (withdraw all 5 mL)
5. Verify balloon is fully deflated before removal attempt
6. Ask patient to take deep breath and exhale
7. Remove catheter gently with steady, smooth motion during exhalation
8. Inspect catheter tip to ensure it's intact
9. Check for any signs of latex reaction on perineal area
10. Dispose per facility biohazard protocol
11. Monitor patient's first void after removal (document time and amount)
12. Assess for urinary retention, discomfort, or difficulty voiding

Product Specifications

Brand: BARDIA® (Bard)
Type: Foley catheter, 2-way indwelling
Size: 16 French (16 Fr) / 5.3 mm outer diameter
Balloon Capacity: 5 mL (inflate with sterile water only)
Coating: Silicone-elastomer coating
Shaft Material: Natural rubber latex with silicone-elastomer coating
Length: Standard adult Foley length
Tip Style: Round, straight for standard insertion
Drainage Eyes: Two polished eyes for optimal flow
Funnel: Color-coded for 16 Fr size identification
Radiopacity: Radiopaque stripe/markers for X-ray visualization (varies by lot)
Sterility: Ethylene oxide (EO) sterilized
Packaging: Sterile, single-use, individually packaged
Use: Single patient use only—never reuse or resterilize
Latex Content: Contains natural rubber latex—verify allergy status before use
Packaging: Sold individually for convenient single-use dispensing
Best For: Routine short- to intermediate-term catheterization in patients without latex allergies requiring 16 Fr drainage capacity

IMPORTANT LATEX NOTICE: This catheter contains natural rubber latex which may cause allergic reactions in latex-sensitive individuals. Always verify patient allergy status before use. For latex-allergic patients, select latex-free or 100% silicone catheter alternatives.

BARDIA's silicone-elastomer coated Foley catheter delivers smooth, low-friction insertion with reliable 5 mL balloon retention and consistent two-eye drainage performance—providing enhanced patient comfort and dependable functionality clinicians trust for routine bladder management in patients without latex sensitivities, conveniently packaged individually for single-use efficiency.