Evolution® Seat Base for Xpresso — Mini, Regular & Tall
The Evolution® Xpresso Seat Base is an OEM replacement seat-support component for compatible Xpresso rollators. It provides the rigid platform beneath the seat cushion and helps restore proper seat support and folding function on Xpresso Mini, Regular and Tall models.
Verified OEM Reference: The current Med Supplies listing identifies this product as Evolution Seat Base For Xpresso (Mini, Reg, & Tall), SKU B07-SB-ZR. Evolution Xpresso parts listings identify the seat base reference as B07/SB/XR. The base is a replacement component for the Xpresso seating system and is not the seat cushion itself.
B07/SB/XR
Evolution reference for the Xpresso Series seat base.
Mini / Regular / Tall
Designed for the three standard Xpresso height configurations.
Rigid Seat Support
Provides the structural base beneath the Xpresso seat cushion.
Model-Specific
Designed for the Xpresso frame and folding-seat geometry.
Why Choose the Evolution® Xpresso Seat Base?
The seat base is an important structural part of the Xpresso rollator's center-folding seat system. A damaged, cracked, bent or missing base can affect seat support and may interfere with the intended folding or unfolding action of the rollator.
Replacing the seat base allows a serviceable Xpresso frame to retain its original seating configuration without replacing the complete rollator. The B07/SB/XR reference is listed for the Xpresso Series and should be matched to the exact walker generation before ordering.
Key Features
- Evolution® Xpresso replacement Seat Base.
- Med Supplies SKU: B07-SB-ZR.
- Evolution parts reference: B07/SB/XR.
- Compatible with Xpresso Mini, Regular and Tall configurations.
- Rigid structural support for the seat area.
- Designed to maintain the original Xpresso center-folding seat geometry.
- Model-specific replacement component.
- Designed for the standard Xpresso Series rather than Xpresso Lite CF.
- Seat cushion/pad is not included.
- Useful for replacement, repair and rollator refurbishment.
- Unit of sale: 1 each.
Benefits
- Restores structural support beneath the Xpresso seat cushion.
- Helps maintain proper seat positioning on a compatible Xpresso frame.
- Can restore the intended center-folding seat function when the original base is damaged.
- Allows replacement of the seat-support component without replacing the complete rollator.
- OEM reference simplifies ordering and maintenance.
- Suitable for home-care, rental, clinic and rehabilitation equipment service.
Common Applications
- Replacement of a cracked or damaged Xpresso seat base.
- Replacement of a missing seat-support platform.
- Restoration of the Xpresso folding seat system.
- Xpresso Mini, Regular and Tall rollator maintenance.
- Wheelchair/rollator service and refurbishment programs.
Xpresso Size Compatibility
| Model |
Seat Height |
Seat Width |
Capacity |
| Xpresso Mini |
18" |
18" |
300 lb |
| Xpresso Regular |
21" |
18" |
300 lb |
| Xpresso Tall |
24" |
18" |
350 lb |
The three standard Xpresso sizes share the 18-inch seat width; seat height and handle height vary by model.
Seat Base vs. Seat Cushion
The seat base is the structural support component beneath the seating surface. The rubber seat pad/cushion is a separate replacement part. For the standard Xpresso Series, the seat pad reference is B07XPR, while the seat base is B07/SB/XR.
This listing is for the seat base only. Do not assume the cushion or other seat hardware is included unless specifically stated in the selected product configuration.
Important Model Distinction
Evolution uses separate seat-base references for the standard Xpresso, Xpresso Lite and Xpresso Lite CF families. The standard Xpresso reference is B07/SB/XR; Xpresso Lite uses B07/SB/XL; Xpresso Lite CF uses B07/SB/CF.
Do not substitute these bases simply because the walkers look similar. The frame and folding geometry differ between product families.
Usage and Safety Information
Confirm the walker is a compatible standard Xpresso Mini, Regular or Tall before installation. Do not install the seat base on an Xpresso Lite or Xpresso Lite CF unless Evolution specifically confirms compatibility.
Install the base using the original mounting hardware and manufacturer-approved procedure. Verify that the base is fully secured and that the seat folds and unfolds normally without binding.
Before seated use, confirm that the seat base is stable and securely attached. Always engage both rollator brakes and remain stationary on a firm, level surface when sitting on the rollator.
Do not use the rollator for seated rest if the seat base is cracked, bent, loose or otherwise damaged. Inspect the base and mounting hardware periodically for wear.
Product and Ordering Information
This listing covers the Evolution® Seat Base for the standard Xpresso Series.
- Brand: Evolution® / Evolution Technologies.
- Product: Seat Base for Xpresso.
- Med Supplies SKU: B07-SB-ZR.
- Evolution parts reference: B07/SB/XR.
- Compatible sizes: Xpresso Mini, Regular and Tall.
- Mini seat height: 18".
- Regular seat height: 21".
- Tall seat height: 24".
- Seat width: 18" on standard Xpresso Mini, Regular and Tall.
- Seat pad/cushion: Not included.
- Xpresso Lite seat-base reference: B07/SB/XL.
- Xpresso Lite CF seat-base reference: B07/SB/CF.
- Unit of sale: 1 each.
Important: The standard Xpresso seat-base reference is B07/SB/XR (Med Supplies SKU B07-SB-ZR). It fits the Xpresso Mini, Regular and Tall standard series. Do not confuse it with the separate B07/SB/XL or B07/SB/CF bases for Xpresso Lite families.
780 409-1509
Get directions
