Pride Power Scooter Battery – AGM 40Ah
Reliable deep-cycle battery power for compatible Pride mobility scooters. This sealed 12V, 40Ah AGM battery is designed to support repeated charging and everyday powered mobility.
40Ah Capacity
Deep-cycle scooter power
12V Battery
For compatible battery systems
Sealed AGM
No routine water refilling
Replacement Power
For selected Pride scooters
Product Overview
The Pride Power Scooter AGM 40Ah Battery is a sealed, deep-cycle replacement battery intended for mobility scooters that specify this voltage and capacity. Absorbent Glass Mat (AGM) technology provides maintenance-free operation without routine electrolyte top-ups.
Many compatible Pride scooters use two 12V batteries together in a 24V system. Check your scooter owner's manual, the existing battery label, battery compartment dimensions, terminal arrangement and connector requirements before ordering. A 40Ah rating alone does not establish compatibility.
Key Features
- 40Ah Deep-Cycle Capacity: Designed for repeated discharge and recharge during mobility scooter use.
- Sealed AGM Chemistry: Spill-resistant construction requiring no routine water refilling.
- 12V Power: Suitable for scooter electrical systems specified to use 12V 40Ah batteries.
- Everyday Reliability: Helps restore performance when a worn battery is replaced with a correctly specified unit.
- Low-Maintenance Design: Convenient for routine scooter operation and charging.
Product Specifications
| Product |
Mobility scooter replacement battery |
| Intended Application |
Compatible Pride power scooters |
| Battery Chemistry |
AGM (Absorbent Glass Mat), sealed lead acid |
| Nominal Voltage |
12V per battery |
| Rated Capacity |
40Ah |
| Maintenance |
Sealed; no water refilling |
| Terminals / Dimensions |
Verify against actual product SKU and existing battery |
| Quantity |
Confirm whether listing is for one battery or a pair |
Compatibility & Ordering
Selected Pride scooter models specify two 40Ah AGM/SLA batteries. Model requirements vary, and some scooters offer different battery configurations. Match the manufacturer's approved specification and confirm the battery tray fit, terminal location, wiring and charger compatibility. For a two-battery scooter, replacing both batteries together is generally recommended rather than mixing old and new batteries.
Charging & Care
- Charge only with a charger approved for your scooter and battery chemistry.
- Follow the scooter manufacturer's charging instructions; avoid leaving batteries deeply discharged.
- Keep battery terminals and connections secure and inspect for damage or corrosion.
- Do not open, puncture, short-circuit or expose batteries to extreme heat.
- Recycle spent lead-acid batteries through an approved battery recycling program.
Important: Battery compatibility, physical dimensions, terminal layout, manufacturer part number, warranty and package quantity must be confirmed for the actual item being sold. Installation and handling should follow the Pride scooter owner's manual.
Med Supplies Canada
Find mobility scooter batteries, chargers and replacement accessories at Med Supplies in Edmonton, Alberta. We help customers choose dependable mobility solutions that support independence and everyday comfort.
