Why Soft Convex Barriers for Flush or Retracted Stomas

Stomas that sit at or below skin level create significant challenges for standard flat barriers—output can seep under the adhesive edge, causing leaks and skin irritation. Soft convex barriers feature a gentle outward curve that applies mild pressure to the peristomal area, effectively bringing the stoma forward to create proper protrusion for a secure seal. Unlike rigid convexity that can cause discomfort or skin damage, soft convex designs provide just enough gentle pressure to fill skin folds and irregularities without excessive force. The one-piece construction simplifies application by eliminating the need to match separate barriers and pouches—everything arrives as a single, integrated system. For users with flush or retracted stomas who struggle with leak-prone flat barriers, soft convex one-piece systems offer improved security, simplified changes, and enhanced confidence.

Key Features

• Soft convex barrier: shallow outward curve for gentle pressure on flush/retracted stomas
• One-piece design: integrated barrier and pouch for simplified application
• Cut-to-fit opening: accommodates stoma sizes 10-28 mm for customized fit
• Drainable pouch: Soft Tap (clipless) closure enables easy emptying without removal
• Integrated filter: reduces odor and prevents pouch ballooning
• Flexible, quiet fabric: soft material moves naturally with body
• Skin-friendly adhesives: gentle formulation for comfort during wear
• Discreet design: quiet, low-profile wear under clothing
• Latex-free construction: safe for latex-sensitive users (verify specific SKU)
• Box of 10: economical supply for regular users

Benefits

• Improves seal and reduces leakage for challenging stoma profiles
• Simplifies application with one-piece design—no parts to match
• Customizable opening ensures proper fit around individual stomas
• Enables repeated emptying without full pouch replacement
• Filter maintains pouch flatness and controls odor for discretion
• Gentle convexity provides support without excessive pressure
• Single-unit design reduces supply complexity and ordering errors

Clinical Applications

✓ Flush stomas: ideal for stomas even with abdominal surface
✓ Retracted stomas: gentle pressure brings stoma forward for better seal
✓ Challenging peristomal areas: compensates for skin folds or irregularities
✓ Colostomy care: secure drainage for formed to semi-formed output
✓ Ileostomy care: reliable adhesion for liquid to paste consistency output
✓ Leak-prone flat barrier users: solution for those struggling with standard barriers
✓ Simplified care needs: one-piece convenience for users or caregivers
✓ Active lifestyles: soft convex support during movement and activity

Usage & Application

For individuals with colostomies or ileostomies featuring flush or retracted stomas who require soft convex support and one-piece system convenience.

Determining if you need soft convexity: Consult with your ostomy nurse or healthcare provider. Soft convexity is typically recommended when:

• Your stoma sits at or below skin level (flush or retracted)
• You experience frequent leaks with flat barriers
• You have skin folds or creases around the stoma
• Standard flat barriers don't maintain adequate seal

To prepare and apply:

1. Cleanse the peristomal skin with warm water and pat completely dry
2. Measure your stoma size using a measuring guide or template
3. Select the appropriate cutting template that matches your stoma size within the 10-28 mm range
4. Trace the measured size onto the barrier's cut-to-fit opening area
5. Carefully cut the opening to match your stoma size—cut slightly larger (1-2 mm) than the stoma to prevent contact with the barrier edge
6. Remove the backing paper from the barrier
7. Warm the entire one-piece system between your hands for 30-60 seconds to improve adhesion
8. Center the cut opening over your stoma
9. Apply gentle, firm pressure to the convex area, pressing the barrier against your abdomen—the soft convexity should make good contact with the peristomal skin
10. Press outward from the stoma to eliminate air pockets and ensure complete adhesion
11. Hold pressure for 30-60 seconds

To empty the pouch:

1. Sit on toilet or position over toilet bowl
2. Open the Soft Tap closure by unfolding or releasing (no clips required)
3. Drain contents into toilet
4. Wipe the inside of the tail clean with toilet paper
5. Close and secure the Soft Tap closure

Filter maintenance: The integrated filter works automatically. If the filter becomes wet or clogged (reducing venting efficiency), replace the entire one-piece system with a fresh one.

Wear time: Change the one-piece system when you notice barrier erosion, leakage, itching, burning sensations, or per your routine schedule. Typical wear time varies by individual output and activity level.

Removal: Gently peel the one-piece system from top to bottom while supporting your skin. Use adhesive remover if needed to prevent skin trauma.

Important: Soft convex barriers apply gentle pressure to the peristomal area. If you experience excessive discomfort, skin blanching (whitening), or marks that don't fade within 30 minutes after removal, consult your ostomy nurse—you may need a different convexity level or return to a flat barrier.

Technical Specifications

• System type: One-piece drainable ostomy pouch with integrated convex barrier
• Barrier profile: Soft convex (shallow depth, gentle pressure)
• Stoma opening: Cut-to-fit, accommodates approximately 10-28 mm stoma sizes
• Closure system: Soft Tap (clipless) tail closure for drainage
• Filter: Integrated odor-barrier and anti-ballooning filter
• Pouch material: Flexible, quiet fabric for discreet wear
• Adhesive: Skin-friendly formulation for gentle, secure hold
• Profile: Low-profile design for minimal visibility under clothing
• Latex status: Typically latex-free (verify specific SKU)
• Quantity: 10 pouches per box (10/bx)
• Intended use: Single-patient use; dispose after each change
• Sterility: Non-sterile (standard for ostomy wear products)
• Suitable stoma types: Flush or retracted stomas requiring soft convex support