Airgo® Backrest Hardware Kit — Fusion & Excursion Rollator/Transport Chairs
The Airgo® Backrest Hardware Kit is an OEM replacement hardware set designed to securely mount the backrest to compatible Airgo side-folding rollator/transport chairs. It includes two special M6 × 16 mm bolts and two hex locknuts for compatible Fusion and Excursion configurations.
Verified OEM Reference: The Airgo parts documentation identifies B01-861 as Hardware for Backrest, consisting of 2 special M6 × 16 mm bolts and 2 hex locknuts. It is specified for compatible Airgo Fusion and Excursion side-folding models. This is hardware only; the backrest itself is not included.
B01-861
Airgo/AMG OEM part number for the backrest hardware set.
M6 × 16 mm Bolts
Includes two special M6 × 16 mm backrest mounting bolts.
2 Hex Locknuts
Includes two matching hex locknuts for secure mounting.
Fusion / Excursion
Used on compatible Airgo Fusion and Excursion side-folding configurations.
Why Choose the Airgo® Backrest Hardware Kit?
The backrest hardware is a small but important part of the Airgo rollator/transport chair seating system. Proper mounting hardware keeps the backrest securely attached to the frame and helps maintain the intended seating configuration.
Replacing missing, damaged or worn bolts and locknuts with the correct B01-861 hardware set can restore the backrest mounting connection without replacing the complete backrest. The same hardware reference is documented for selected Fusion and Excursion models.
Key Features
- Airgo® replacement backrest hardware kit.
- Airgo/AMG part number: B01-861.
- Includes 2 special M6 × 16 mm bolts.
- Includes 2 hex locknuts.
- Designed to secure the backrest to compatible Airgo frames.
- Compatible with selected Fusion rollator/transport chairs.
- Compatible with selected Excursion rollators.
- Used on Airgo Fusion F20/F23 configurations and Excursion X18/X20 configurations documented in Airgo parts manuals.
- Hardware only; backrest is not included.
- Sold as 1 complete hardware set.
Benefits
- Restores the backrest mounting hardware on a compatible Airgo unit.
- Replaces missing or damaged bolts and locknuts.
- Provides the correct hardware specification for documented Fusion and Excursion configurations.
- Allows backrest repair without replacing the complete chair or rollator.
- Helps maintain a secure and stable backrest during seated use.
- OEM part identification makes ordering and service easier.
Common Applications
- Airgo Fusion F20 and F23 backrest repair.
- Airgo Excursion X18 and X20 backrest repair.
- Replacement of missing backrest mounting hardware.
- Replacement of damaged or worn backrest bolts and locknuts.
- Routine rollator/transport chair maintenance and refurbishment.
- Home-care, rental, rehabilitation and mobility-equipment service.
Hardware Contents & Compatibility
| Component |
Quantity |
Specification |
| Special Backrest Bolt |
2 |
M6 × 16 mm |
| Hex Locknut |
2 |
Matching locknuts |
| Fusion |
Compatible configurations |
F20 / F23 documented |
| Excursion |
Compatible configurations |
X18 / X20 documented |
Compatibility Note
Airgo has multiple rollator and transport-chair generations, and backrest mounting hardware can vary between revisions. The B01-861 set is documented for the listed Fusion and Excursion configurations, but the exact model and revision should be confirmed before ordering.
The Airgo Excursion parts documentation specifically instructs customers to verify the model number and model revision before ordering replacement parts. This is especially important when the unit has been modified or has an older/newer frame revision.
Usage and Safety Information
Confirm the exact Airgo model and frame revision before installing the hardware. Do not substitute bolts or locknuts of a different size, grade or length unless specifically approved by the manufacturer.
Install the backrest hardware according to the applicable Airgo service instructions. Tighten the fasteners securely and verify that the backrest is stable with no excessive movement before anyone sits in the chair.
Do not use the rollator/transport chair if the backrest is loose, damaged or improperly attached. Recheck the hardware periodically, particularly after initial installation and after repeated folding or transport.
Product and Ordering Information
This listing covers the Airgo® Backrest Hardware Kit for compatible rollator/transport chair models.
- Brand: Airgo® / AMG / Drive Medical.
- Product: Hardware for Backrest.
- Part number: B01-861.
- Contents: 2 special M6 × 16 mm bolts + 2 hex locknuts.
- Compatible documented models: Airgo Fusion F20/F23 and Excursion X18/X20.
- Function: Backrest mounting hardware.
- Backrest: Not included.
- Unit of sale: 1 complete hardware set.
- Confirm exact model and revision before ordering.
Important: The correct Airgo reference is B01-861. The set contains 2 special M6 × 16 mm bolts and 2 hex locknuts. Confirm the exact Airgo model and revision before ordering; the backrest itself is not included.
