Vicair Adjuster O2 6 cm Wheelchair Cushion

Why Choose Vicair Adjuster O2 6 cm Wheelchair Cushion

Standard foam cushions flatten under sustained load, losing their pressure redistribution properties progressively throughout the day. Inflatable cushions maintain performance but require pump access and regular pressure checks that many users find impractical for daily wheelchair life. The Vicair Adjuster O2 sits between these two approaches: SmartCell technology consists of small interconnected air cells that self-adjust continuously to the user's seating posture and weight distribution without any pump, valve, or external inflation. Pressure is redistributed dynamically across the ischial tuberosities, coccyx, and surrounding tissue without requiring manual intervention. The 6 cm profile is intentionally low — seat-to-floor height is a significant functional consideration for wheelchair users, and a 6 cm cushion adds less height than standard 8–10 cm alternatives, preserving footrest positioning and reach geometry. Individual SmartCell compartments can be adjusted by a clinician for localised pressure reduction or pelvic asymmetry correction — providing a level of postural customisation not available in standard foam formats. Machine washable to 60°C. Maximum user weight 250 kg / 550 lbs. Lightweight at approximately 725 g.

Key Features

✔ SmartCell technology — self-adjusting air cells requiring no pump or inflation

✔ 6 cm low-profile height for minimal impact on seat-to-floor geometry

✔ Redistributes pressure across IT/coccyx area and surrounding seating surface

✔ Adjustable cell compartments for clinician-customised postural support

✔ Designed to assist in managing pelvic asymmetry

✔ Breathable construction for temperature and moisture regulation

✔ Machine washable to 60°C for easy hygiene maintenance

✔ Latex-free — maximum user weight 250 kg / 550 lbs

✔ Lightweight — approximately 725 g

Benefits

✔ Continuous dynamic pressure redistribution without manual pump adjustment

✔ Low profile preserves seat-to-floor height and functional wheelchair positioning

✔ SmartCell adjustment accommodates posture changes throughout the day

✔ Assists pelvic asymmetry management alongside other postural supports

✔ Machine washable construction simplifies daily hygiene for long-term users

Clinical & Typical Applications

✔ Daily wheelchair users requiring long-duration pressure redistribution support

✔ Ischial tuberosity and coccyx pressure protection for seated users at risk

✔ Pelvic asymmetry management requiring adjustable cell-compartment positioning

✔ Users for whom seat-to-floor height preservation is a functional priority

✔ Users seeking an alternative to inflatable cushions without pump management requirements

Usage & Care

Position the cushion on the wheelchair seat with the correct orientation per the label — the IT groove or contoured zone should align with the user's ischial tuberosities. Consult a seating clinician or physiotherapist for individual compartment adjustment to achieve correct pressure distribution and postural support for your anatomy. The cover is machine washable at up to 60°C — wash separately from the SmartCell interior if applicable to the model. Do not tumble dry at high heat. Inspect SmartCells periodically for damage or loss of function. Replace when pressure redistribution performance is noticeably reduced. Always confirm suitability for your specific pressure injury risk and postural needs with a qualified seating or rehabilitation clinician.