Drive® Blue Streak® Replacement Caster Bearings — Diagram Part #16
The Drive® Blue Streak® Replacement Caster Bearings are OEM service bearings used in the front caster assemblies of compatible Blue Streak wheelchairs. They support smooth caster rotation and help maintain proper front-wheel steering and maneuverability.
Verified OEM Reference: The Blue Streak parts diagram identifies Diagram Part #16 as Caster Bearings, Drive part number STDS1011. The Blue Streak 4S, 10H and 17S parts reference specifies an 8 mm inside diameter × 22 mm outside diameter bearing.
Diagram #16
Caster Bearings identified as Part #16 in the Blue Streak parts diagram.
STDS1011
Drive OEM part number for the caster bearing.
8 mm × 22 mm
Blue Streak parts documentation specifies 8 mm ID and 22 mm OD.
Front Caster
Supports the caster wheel assembly and smooth swivel movement.
Why Choose the Drive® Blue Streak® Caster Bearings?
The caster bearings are important wear components inside the Blue Streak front caster assemblies. When bearings become worn or damaged, the caster may develop play, noise, rough rotation or reduced maneuverability.
Replacing the bearing with the correct Drive OEM component can restore the caster's intended movement without replacing the entire caster assembly. The STDS1011 is also used on other Drive mobility products, but the exact application should always be confirmed before installation.
Key Features
- Drive® Blue Streak® replacement caster bearing.
- Diagram Part #16.
- Drive OEM part number: STDS1011.
- 8 mm inside diameter.
- 22 mm outside diameter.
- Used in the front caster assembly.
- Designed for compatible Blue Streak 4S, 10H and 17S configurations.
- Helps restore smooth caster rotation.
- Replacement/service component.
- STDS1011 is also used on selected other Drive wheelchair and rollator models.
- Unit of sale should be confirmed against the supplier listing; the bearing itself is a single OEM component.
Benefits
- Helps restore smooth front-caster swivel movement.
- Replaces worn, noisy or damaged caster bearings.
- Can reduce unwanted caster play when the bearing is the source of the problem.
- Allows bearing-level repair instead of replacing the complete caster assembly when appropriate.
- OEM part identification simplifies ordering and service.
- Helps maintain proper front-wheel maneuverability.
Common Applications
- Drive Blue Streak wheelchair caster repair.
- Blue Streak 4S, 10H and 17S configurations.
- Replacement of worn front caster bearings.
- Wheelchair refurbishment and preventative maintenance.
- Home-care, rental, rehabilitation and healthcare equipment service.
Part Identification
| Specification |
Details |
| Product |
Caster Bearings |
| Diagram Part |
#16 |
| Drive Part Number |
STDS1011 |
| Inside Diameter |
8 mm |
| Outside Diameter |
22 mm |
| Blue Streak Reference |
4S, 10H & 17S serial configurations |
Important Bearing Identification
Do not confuse the caster bearing STDS1011 with the fork stem bearing STDS8M4601. The caster bearing supports the wheel/caster assembly, while the fork stem bearing supports the fork stem and swivel assembly.
| Bearing |
Part Number |
Typical Blue Streak Diagram |
| Caster Bearing |
STDS1011 |
#16 |
| Fork Stem Bearing |
STDS8M4601 |
#20 |
Usage and Safety Information
Confirm the bearing dimensions and Blue Streak configuration before installation. Bearing replacement should be performed by a qualified wheelchair technician or appropriately trained person.
After installation, verify that the caster is correctly assembled, the wheel rotates freely and the caster swivels without excessive play or binding.
Do not use the wheelchair if the caster fork, axle, bearings or mounting hardware are loose, cracked, bent or improperly assembled. Inspect the entire caster assembly when replacing a bearing.
Product and Ordering Information
This listing covers the Drive® Blue Streak® Replacement Caster Bearings, Diagram Part #16.
- Brand: Drive® Medical.
- Product: Caster Bearings.
- Diagram Part: #16.
- Drive OEM part number: STDS1011.
- Inside diameter: 8 mm.
- Outside diameter: 22 mm.
- Primary Blue Streak reference: 4S, 10H and 17S serial configurations.
- Location: Front caster assembly.
- Unit of sale: Verify supplier package quantity before ordering.
Important: The correct OEM reference for Blue Streak Diagram Part #16 is STDS1011, with an 8 mm ID × 22 mm OD specification. Do not confuse it with the Blue Streak Fork Stem Bearing STDS8M4601.
780 409-1509
Get directions
