Coloplast Mio 2 Piece Flex Barrier, Light Convex, Cut-To-Fit 15mm - 40mm, Flange Size 50mm 5/Bx

Why Choose Coloplast SenSura Mio Flex Light Convex Barrier Cut-to-Fit 15–40mm

Light convex and soft convex describe meaningfully different degrees of inward protrusion at the barrier's inner ring. Light convex provides the minimum convex profile — a very gentle curve that introduces the smallest amount of inward pressure at the stoma base, appropriate for users who need just enough convexity to improve seal geometry at a flush or very mildly retracted stoma, but where even the moderate pressure of a soft convex format causes discomfort or skin reaction. This minimal convex is also appropriate as a stepping-stone for users transitioning from a flat barrier to convex — introducing the lightest convex profile first allows clinical assessment of stoma response and patient tolerance before moving to deeper convexity if needed. At 15–40mm cut-to-fit range, the light convex format accommodates the full range of smaller to larger adult stoma diameters — relevant for post-operative stoma management and for users whose stoma has not reached a stable size amenable to pre-cut. The Flex adhesive coupling at 50mm connects to compatible SenSura Mio Flex 50mm pouches with the low-profile flexible junction that bends with abdominal movement. Consult a stoma care nurse before using any convex product — even light convex should not be used without clinical assessment.

Key Features

✔ Light convex barrier — minimum convex profile for users needing minimal inward pressure

✔ Cut-to-fit 15–40mm aperture range for post-operative and varied stoma diameter use

✔ Flex adhesive coupling for low-profile flexible 2-piece 50mm flange connection

✔ Compatible with SenSura Mio Flex 50mm pouches

✔ 2-piece system allows pouch changes while barrier remains in place

✔ 5 per box

Benefits

✔ Gentlest convex option for stomas needing minimal convex seal support

✔ Reduces discomfort risk for skin-sensitive users compared with deeper convex formats

✔ Appropriate first-step convex for users transitioning from flat barrier

✔ Cut-to-fit range supports evolving stoma size post-operatively and across adult diameters

✔ Flex coupling bends with body movement for comfortable active daily wear

Clinical & Typical Applications

✔ Flush or mildly retracted stomas requiring the lightest possible convex seal support

✔ Users with peristomal skin sensitivity where soft or deep convex creates discomfort

✔ First-step convex introduction for flat-barrier users assessed as needing minimal convexity

✔ Post-operative stoma management requiring light convex with cut-to-fit aperture flexibility

✔ SenSura Mio Flex 50mm system users requiring light convex barrier option

Usage & Care

Confirm light convex is clinically appropriate with a stoma care nurse — never initiate convex use without clinical assessment. Measure stoma before cutting — aperture no more than 3mm larger than stoma within the 15–40mm range. Apply to clean, dry peristomal skin and press firmly from stoma outward. Attach compatible SenSura Mio Flex 50mm pouch. Change every 3–5 days or when lifting, leaking, or skin changes are observed. Consult a stoma care nurse for convex depth selection, wear-time guidance, and peristomal skin assessment.