Coloplast Sensura Mio 1 Piece, Deep Convex, Wide-Outlet Drainable, Maxi, W/ Filter, Pre-Cut 21mm 10/Bx

Why Choose Coloplast SenSura Mio 1 Piece Deep Convex Drainable Maxi 21mm

Deep convex is not an upgrade from flat — it is a clinical necessity for a specific anatomical presentation. When a stoma sits below skin level, in a deep fold, or on an uneven abdominal surface, flat and light convex barriers cannot generate the outward pressure needed to maintain a seal at the stoma base. Output tracks under the wafer, skin breakdown follows, and confidence collapses. The SenSura Mio Deep Convex baseplate applies stronger, more sustained inward pressure to encourage stoma protrusion and restore seal integrity where lighter systems fail. Coloplast specifies this product for stomas below skin level or deep-seated areas requiring strong convex support. The pre-cut 21mm opening eliminates trimming, the wide EasiClose® outlet simplifies emptying for higher-output ileostomies, the maxi pouch increases between-change intervals, and Coloplast's full-circle filter reduces ballooning by up to 61% for more confident overnight and extended wear. Neutral grey textile cover minimises friction and noise under clothing. Box of 10.

Key Features

✔ Deep convex baseplate for strong protrusion support and leak-resistant seal

✔ Pre-cut 21mm opening — ready to use with no trimming required

✔ One-piece drainable system with barrier permanently bonded to pouch

✔ Wide EasiClose® outlet for easier, cleaner high-output emptying

✔ Maxi pouch for higher output capacity and extended wear intervals

✔ Full-circle filter — up to 61% reduction in ballooning (Coloplast data)

✔ Neutral grey textile cover for discretion, comfort, and reduced friction

✔ Box of 10 — item reference 16760

Benefits

✔ Prevents leakage for flush, retracted, and difficult-to-fit stomas

✔ Maintains stronger seal integrity on uneven or folded abdominal contours

✔ Protects peristomal skin from output exposure and breakdown

✔ Wide outlet and maxi capacity simplify management for higher-output ostomies

✔ Filter reduces ballooning for improved confidence during overnight and extended wear

Clinical & Typical Applications

✔ Retracted or below-skin-level ileostomy and colostomy management

✔ Deep skin folds or uneven abdominal surfaces requiring convex support

✔ Peristomal skin protection following output leakage and skin breakdown

✔ Frequent leakage patients failing flat or light convex barrier systems

✔ Higher-output stoma management requiring maxi-capacity drainable pouch

Usage & Care

Ensure peristomal skin is clean and dry before application. The pre-cut 21mm opening should match the stoma size accurately — consult your stoma care nurse if the opening size does not correspond to your stoma diameter. Warm the baseplate briefly between hands to activate adhesion. Press firmly around the stoma base for 30–60 seconds to establish the convex seal. Empty the wide outlet pouch when one-third full. Change the full system every 1–3 days or when the barrier begins to lift. Deep convex products require assessment by a stoma care nurse before use to confirm correct pressure and fit for your stoma profile.