Why No-Sting Silicone-Based Adhesive Remover

Repeated adhesive removal with aggressive products or "dry peeling" causes cumulative skin damage known as Medical Adhesive-Related Skin Injury (MARSI). Adapt No-Sting's silicone formula breaks adhesive bonds gently without alcohol-based stinging, allowing clean barrier removal that protects fragile peristomal skin—critical for ostomates who change appliances multiple times weekly for years.

Key Features & Benefits

• No-sting, silicone-based remover for comfortable adhesive release
• Spray format reaches edges and under flanges/tape evenly
• Fast-evaporating leaves no greasy residue for quicker reapplication
• Fragrance-free, dye-free formulation for sensitive skin
• Latex-free construction
• Compatible with ostomy barriers, tapes, dressings, medical devices
• Helps reduce skin trauma (MARSI) during pouch or dressing changes
• Shortens change time with less tugging and fewer painful removals

Clinical Applications

Appropriate for: ✓ Ostomy barrier removal - reducing peristomal skin damage
✓ Medical tape and dressing removal on fragile skin
✓ Wound care dressing changes
✓ Catheter securement device removal
✓ Sensitive or elderly skin requiring gentle adhesive release
✓ Frequent appliance changes requiring skin protection
✓ MARSI prevention protocols

Usage & Application

For External Use on Intact Skin Only

Barrier/Appliance Removal:

1. Hold spray 4-6 inches from skin
2. Spray around edge of barrier, tape, or dressing
3. Allow 10-15 seconds for adhesive to dissolve
4. Gently lift edge as adhesive releases
5. Continue spraying and lifting around perimeter
6. Support skin with other hand to prevent pulling

Adhesive Residue Removal:

1. Spray any remaining adhesive residue on skin
2. Allow product to penetrate for a few seconds
3. Wipe away dissolved residue with soft cloth or gauze
4. Repeat if needed for stubborn residue

Skin Preparation for Reapplication:

1. Allow skin to dry completely (fast-evaporating formula)
2. No soap/water rinse needed unless desired
3. Skin is ready for new barrier/appliance application
4. No greasy residue interferes with adhesion

Important Safety Notes:

• Do NOT spray directly into stoma, wounds, or mucous membranes
• For external use on intact skin only
• Avoid contact with eyes
• If irritation develops, discontinue use
• Keep away from flames (aerosol)

Storage:

• Store at room temperature
• Do not puncture or incinerate can
• Keep out of reach of children

Product Specifications

Product: Adapt™ No-Sting Medical Adhesive Remover Spray
Size: 50 mL (1.7 oz) aerosol spray can
Base: Silicone-based (non-alcohol formulation)
Formulation: No-sting, fragrance-free, dye-free
Skin Type: Suitable for sensitive or fragile skin
Evaporation: Fast-drying, no greasy residue
Materials: Not made with natural rubber latex
Compatibility: Ostomy barriers, medical tapes, dressings, securement devices
Use: External application on intact skin
Packaging: Single 50 mL can
Best For: MARSI prevention, frequent appliance changes, sensitive skin

Adapt™ No-Sting Adhesive Remover Spray protects skin health through gentle, silicone-based adhesive dissolution—helping prevent cumulative damage from repeated barrier changes while maintaining the clean skin surface needed for secure reapplication.