Pride® 24V 2A 3-Pin XLR Mobility Scooter & Power Chair Charger
The Pride® 24V 2A 3-Pin XLR Charger is a compact off-board charger designed for compatible 24V mobility scooters and power chairs using a 3-pin XLR charging connection. It is suitable for select Pride® Go-Go® Elite Traveller Plus models and compatible Jazzy® power chairs when the equipment specifies a 24V, 2A, 3-pin XLR charger.
Compatibility Warning: A 3-pin XLR connector alone does not guarantee compatibility. Pride confirms that Go-Go Elite Traveller Plus 3-wheel and 4-wheel models use an off-board 2A charger, but charger specifications can vary by battery type and model. Verify the equipment model, battery type, required charging current and connector before ordering.
24V System
Designed for compatible 24V mobility scooter and power-chair battery systems.
2A Charging
2-amp off-board charger configuration used by the Go-Go Elite Traveller Plus.
3-Pin XLR
Male 3-pin XLR charging connector for compatible charging ports.
Compact Off-Board
Portable charger can be used with compatible equipment for convenient charging away from the vehicle.
Why Choose a 24V 2A 3-Pin XLR Charger?
A compatible replacement charger keeps a mobility scooter or power chair's battery system ready for everyday use. The 2A off-board configuration is specifically associated with the Pride Go-Go Elite Traveller Plus 3-wheel and 4-wheel models.
The 3-pin XLR connector provides the charging interface used on many mobility devices. However, the charger must match the battery chemistry and electrical requirements of the specific equipment. Pride specifically advises matching the charger to the scooter's battery and model because chargers that look similar can have different amperage and voltage characteristics.
Key Features
- 24V nominal mobility-device charger configuration.
- 2A off-board charging output.
- Male 3-pin XLR charging connector.
- Designed for compatible Pride® mobility scooters and Jazzy® power chairs using the specified charging system.
- Compatible with select Go-Go® Elite Traveller Plus 3-wheel and 4-wheel models when matched to the correct battery system.
- Compact portable design.
- Suitable as a replacement or backup charger when specifications match.
- Designed for rechargeable mobility-device battery packs.
- Med Supplies SKU: B01M5BCEYR.
- Unit of sale: 1 each.
Benefits
- Helps keep compatible mobility equipment charged and ready for use.
- 2A charging configuration matches the charger specification listed by Pride for the Go-Go Elite Traveller Plus.
- 3-pin XLR connector provides a familiar charging interface for compatible equipment.
- Compact design is convenient for home use, service departments and travel.
- Useful as a replacement when the original charger is lost, damaged or no longer functioning.
- Can be kept as a backup charger when approved for the specific device.
Common Applications
- Pride Go-Go Elite Traveller Plus 3-wheel scooters.
- Pride Go-Go Elite Traveller Plus 4-wheel scooters.
- Compatible Pride mobility scooters using a 24V 2A 3-pin XLR charging system.
- Compatible Jazzy power chairs using the same specified charger requirements.
- Home, clinic, rental and mobility-equipment service applications.
- Replacement or backup charging.
Compatibility Checklist
| Check |
Required Match |
| Battery system |
Compatible 24V system |
| Charger current |
2A, where specified by the equipment manufacturer |
| Connector |
3-pin XLR with matching pin configuration |
| Battery chemistry |
Must match the charger design; do not substitute a lithium charger for a lead-acid system or vice versa |
| Equipment model |
Confirm the exact Pride/Jazzy model and battery configuration |
Go-Go Elite Traveller Plus Compatibility
Pride's current information identifies the Go-Go Elite Traveller Plus 3-wheel and 4-wheel models as using an off-board 2A charger. The Elite Traveller Plus also uses a 3-pin charger connection at the battery pack/charger port.
The Go-Go Elite Traveller Plus is a discontinued Pride model. Always verify the battery pack and charger specifications on the individual scooter before supplying a replacement.
Usage and Safety Information
Use only a charger specifically matched to the mobility device and its battery. Confirm the voltage, charging current, battery chemistry and connector before connecting the charger.
Charge indoors in a dry, well-ventilated area according to the mobility device manufacturer's instructions. Do not cover the charger or place it near heat, water or flammable materials while operating.
Inspect the charger, power cord, plug and XLR connector before each use. Do not use the charger if any component is damaged, frayed, overheated or unusually noisy. Disconnect power before removing the charging connector.
Do not attempt to modify the XLR connector, change the wiring or use an adapter to force compatibility. An incorrect charger can damage the battery or charging electronics and may create a safety hazard.
Product and Ordering Information
This listing covers a 24V 2A 3-pin XLR off-board mobility scooter/power chair charger for compatible Pride and Jazzy equipment.
- Brand/application: Pride® Mobility / compatible Pride-Jazzy equipment.
- Product: 24V 2A 3-Pin XLR Charger.
- Charger type: Off-board.
- Nominal battery system: 24V.
- Charging current: 2A.
- Connector: Male 3-pin XLR.
- Primary compatibility reference: Go-Go Elite Traveller Plus 3-wheel and 4-wheel models when matched to the specified battery system.
- Additional compatibility: Select Pride scooters and Jazzy power chairs using the same 24V 2A 3-pin XLR charging specification.
- Med Supplies SKU: B01M5BCEYR.
- Unit of sale: 1 each.
- Confirm exact model and battery type before ordering.
Important: Do not rely on the connector alone. Before ordering, verify 24V system + 2A charger requirement + 3-pin XLR + correct battery chemistry for the customer's exact Pride/Jazzy model.
